C887VA-W-E-K9
As low as
A$0.00
In stock
Only %1 left
SKU
C887VA-W-E-K9
Cisco Systems C887VA-W-E-K9 Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp
Cisco Systems C887VA-W-E-K9
Main Specifications
| Product Description | Cisco 887VA Annex A router with VDSL2/ADSL2+ over POTS 802.11n ETSI Compliant - router - DSL modem - desktop |
| Device Type | Router - DSL modem - 4-port switch (integrated) |
| Enclosure Type | Desktop |
| Digital Signaling Protocol | ADSL2, ADSL2+, VDSL2 |
| WAN Ports Qty | 2 |
| Data Link Protocol | Ethernet, Fast Ethernet |
| Capacity | IPSec VPN tunnels: 20 |
| Network / Transport Protocol | L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS |
| Routing Protocol | RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR) |
| Remote Management Protocol | Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI |
| Features | Firewall protection, DHCP support, NAT support, VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy |
| Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x |
| Power | AC 120/230 V (50/60 Hz) |
| Dimensions (WxDxH) | 32.5 cm x 26.4 cm x 4.4 cm |
| Weight | 2.5 kg |
Extended Specifications
| General | |
| Device Type | Router - 4-port switch (integrated) |
| Enclosure Type | Desktop |
| Connectivity Technology | Wired |
| Data Link Protocol | Ethernet, Fast Ethernet |
| Capacity | IPSec VPN tunnels: 20 |
| Network / Transport Protocol | L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS |
| Routing Protocol | RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR) |
| Remote Management Protocol | Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI |
| Encryption Algorithm | LEAP, DES, Triple DES, MD5, SSL, TLS, PEAP, TTLS, TKIP, PKI, 128-bit AES, 192-bit AES, 256-bit AES |
| Authentication Method | RADIUS, Radio Service Set ID (SSID), TACACS+, Extensible Authentication Protocol (EAP), EAP-FAST |
| Features | Firewall protection, DHCP support, NAT support, VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy |
| Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, ETSI, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1 |
| RAM | 256 MB (installed) / 768 MB (max) DDR2 SDRAM - SO-DIMM 200-pin |
| Flash Memory | 128 MB |
| Status Indicators | Port status, power |
| Line Properties | |
| Framing Format | ANSI T1.413 |
| Communications | |
| Type | DSL modem |
| Digital Signaling Protocol | ADSL2, ADSL2+, VDSL2 |
| Protocols & Specifications | ITU G.994.1 (G.hs), ITU G.992.3 Annex A, ITU G.993.2, ITU G.992.5 Annex A |
| Expansion / Connectivity | |
| Interfaces | LAN: 4 x 10Base-T/100Base-TX - RJ-45Management: 1 x console - RJ-45WAN: 1 x ADSL2+USB: 1 x 4 pin USB Type AWAN: 1 x VDSL2 |
| Expansion Slots | 1 (total) / 1 (free) x SO-DIMM 200-pin |
| Power | |
| Power Device | External power adapter - 60 Watt |
| Voltage Required | AC 120/230 V (50/60 Hz) |
| Software / System Requirements | |
| OS Provided | Cisco IOS Advanced Security |
| Dimensions & Weight | |
| Width | 32.5 cm |
| Depth | 26.4 cm |
| Height | 4.4 cm |
| Weight | 2.5 kg |
| Environmental Parameters | |
| Min Operating Temperature | 0 ?C |
| Max Operating Temperature | 40 ?C |
| Humidity Range Operating | 10 - 85% (non-condensing) |
Write Your Own Review